Fracture pattern analysis of fractures to the diaphysis of the fifth metatarsal.

BACKGROUND: Fractures to the fifth's metatarsal (MT-V) diaphysis are common. These are inconsistently referred to as diaphyseal-, shaft-, or Dancer's fractures. A comprehensive analysis of the MT-V fracture morphology is missing. The aim was to qualitatively and quantitatively analyze fracture patterns of MT-V diaphyseal fractures. HYPOTHESIS: Fractures to the shaft of the fifth metatarsal feature specific fracture morphologies. MATERIALS AND METHODS: Retrospective, radiologic database study. Included were all acute, isolated MT-V shaft fractures (including the proximal [Lawrence and Botte (L&B) III] and distal meta-diaphysis). Demographics and fracture characteristics were assessed. Each proximal fracture line was drawn, scaled, and a qualitative and quantitative fracture line analysis was conducted. The quantitative fracture line analysis aimed at identifying dens clusters with arbitrary shape using the DBSCAN algorithm. Data are presented as mean±standard deviation. RESULTS: Out of 704 eligible MT-V fractures, 156 met the inclusion criteria. Patient's mean age was 46±19 years and 94% suffered a low energy trauma. Qualitative and quantitative fracture line analysis revealed three distinct fracture patterns. The proximal (30%) and distal (5%) meta-diaphyseal clusters showed a predominant transverse fracture pattern. The vast majority of diaphyseal fractures (56%) were spiral/oblique fractures, progressing from the proximal lateral meta-diaphyseal region in an oblique course at 61±9° to the medial distal diaphyseal cortex. Seven percent of diaphyseal fractures showed a transverse fracture pattern. DISCUSSION: Based on a qualitative and quantitative analysis of all MT-V shaft fractures, three distinct fracture clusters were identified with homogeneous fracture patterns. MT-V shaft fractures should therefore be classified as proximal meta-diaphyseal (L&B Type III), diaphyseal (oblique or transverse) and distal meta-diaphyseal. LEVEL OF PROOF: IV; retrospective database study.

Femoral Neck Preservation and Diaphyseal Invasion Comparing a Calcar-Metaphyseal Short Stem with its Homonymous Standard Femoral Stem. A Radiographic Study.

BACKGROUND: We aim to compare the preoperative planning radiographs of 50 patients in whom both a short stem and its homonymous standard version were programmed, focusing on the preservation of the neck and the invasion of the femoral shaft. The secondary objective was to evaluate the 50 preoperative radiographs with the 50 postoperative radiographs in which the short stem was implanted, measuring the real invasion of the diaphysis and the real preservation of the femoral neck. MATERIAL AND METHODS: We measured cut level at the femoral neck and diaphyseal invasion in 50 preoperative x-rays where an Alteon Neck Preserving Stem (ANPS) was templated and we compared it with 50 preoperative x-rays where an Alteon Taper Wedge Stem (ATWS) was templated. After surgery, we compared both parameters previously measured in the preoperative x-rays with the 50 postoperative radiographs where the short stem was implanted obtaining the real bone preservation at the femoral neck and the real diaphyseal invasion length. RESULTS: For templating comparison, mean bone preservation at the femoral neck was 14.87mm (SD 3.64) for the ANPS group and 9.94mm (SD 8.39) for the ATWS group (p <0.001). The mean diaphyseal bone invasion was 47.21mm (SD 5.89) and 76.77mm (SD 8.39) for ANPS and ATWS respectively (p <0.001). After surgery, the mean postoperative bone preservation at the femoral neck was 15.08mm (SD 3.1) with a mean of 0.17mm (SD 0.51) more preservation in the preoperative group. CONCLUSION: 1. ANPS allow bone preservation with limited diaphyseal invasion when compared with his homonymous ATWS in the preoperative templates. 2. ANPS showed a good correlation between preoperative radiographs and real bone preservation of the femoral neck and invasion of the femoral shaft.

Metaphyseal and Diaphyseal Contours: Variants and Pitfalls.

We discuss several variants of the metaphyseal and diaphyseal bone surfaces that may be misleading in clinical practice. They include metaphyseal stripes, spiculated metaphyseal cortex, cortical desmoid, laminated lateral supracondylar ridge, cortical vascular canals, variations in shape or lucency of normal tuberosities, cortical thickening of normal ridges, and well-organized undulated hyperostosis at the proximal phalanges.

Precision shaping of elastic stable intramedullary nail for the treatment of metaphyseal diaphysis junction fracture of the distal radius in children: a preliminary report in two centers.

BACKGROUND: This study introduces a novel retrograde precision shaping elastic stable intramedullary nailing (ESIN-RPS) technique and reports clinical outcomes in pediatric distal radius metaphyseal diaphysis junction (DRMDJ) fracture. METHODS: Data about DRMDJs were collected from February 1, 2020, to April 31, 2022 at two hospitals, retrospectively. All patients were treated with closed reduction and ESIN-RPS fixation. The operation time, blood loss, fluoroscopy times, alignment, and residual angulation on X-ray were recorded. At the last follow-up, the function of wrist and forearm rotation were evaluated. RESULTS: Totally, 23 patients were recruited. The mean time of follow-up was 11 months and the minimum was 6 months. The mean operation time was 52 min, and the mean fluoroscopies pulses were 6 times. The postoperative anterioposterior (AP) alignment was 93 ± 4% and the lateral alignment was 95 ± 3%. The postoperative AP angulation was (4 ± 1)°, and the lateral angulation was (3 ± 1)°. At the last follow-up, the evaluation of the Gartland and Werley demerit criteria of wrist revealed 22 excellent cases and 1 good case. The forearm rotation and thumb dorsiflexion functions were not limited. CONCLUSION: The ESIN-RPS is a novel, safe, and effective method for the treatment of pediatric DRMDJ fracture.

Cross-sectional geometry of the femoral diaphyseal cortical bones: analysis of central mass distribution.

A detailed analysis of differences in skeletal shape among many individuals is expected to reveal the mechanical significance behind various morphological features. To confirm the distribution of the cortical bone region in cross sections, the relative position of the central mass distribution (CMD) of the cortical bone region to the CMD of the entire cross section was examined. A total of 90 right human femoral skeletons were examined using clinical multi-slice computed tomography. For nine cross sections of each femur, we determined the CMD of the whole area, including both cortical bone and medullary areas, as CMD-W, and that of the cortical bone region in the same cross section as CMD-C, and they were compared. The medial and anterior portion of the cortex was relatively thick just below the lesser trochanter. The posterior cortical bone tended to be relatively thick in the region from the center to the distal part of the diaphysis. Females had a significantly more medially deviated CMD than males throughout the entire diaphysis. These results suggest that femurs with advanced cortical bone thinning tend to have a concentration of cortical bone in their medial portion. CMD-C was located farther from the diaphysis axis as the degree of medial bending increased. Conversely, the greater the lateral bending of the diaphysis, the closer CMD-C was to the diaphysis axis. As the amount of bone decreases with age, self-adjustment could occur so that the cortical bone's critical area remains to prevent a decrease in mechanical strength.

Fracture edge features of diaphyseal clavicular fractures: a morphologic study.

BACKGROUND: Previous researchers used transverse fractures centered over the midpoint of the clavicle as the diaphyseal clavicular fracture models. However, as a result of shear stress concentration in sigmoid-shaped structures, most diaphyseal clavicular fractures have coronal fracture edges and are located distal to the midpoint. The purpose of this study was to quantify the morphology and utilize these parameters to establish clinically relevant fracture models. METHODS: The computed tomographic DICOM data of 100 consecutive patients were included. We investigated the morphologic characteristics of the fracture edges after virtual fracture reduction. The fracture orientation was determined based on the normal vectors of the best-fit plane of the fracture edges. The fracture location was measured by the extreme points of the edges. The fracture configuration was evaluated using fracture maps. RESULTS: There were 28 simple, 43 wedge, and 29 multifragmentary types. Coronal oriented fracture edges accounted for more than 70% of the simple, wedge, and multifragmentary types. The most proximal point of the proximal edge was located at 46.7% (42.0%-56.5%), 47.6% (42.5%-50.1%), and 46.3% (42.0%-49.3%) of the endpoint line in the simple, wedge, and multifragmentary types, respectively (P = .548). The most distal point of the distal edge was located at 72.2% (68.4%-75.0%), 73.2% (69.5%-76.9%), and 74.0% (69.6%-77.1%) of the endpoint line (P = .353). The longest proximal main fragments occurred in the simple types at 71.9% (66.3%-75.4%) of the endpoint line (P < .001), and the shortest distal main fragments occurred in the multifragmentary types at 55.8% (49.8%-59.3%) of the endpoint line (P = .001). The heatmaps showed a high concentration of anteriorly distributed wedge fragments (88%; n = 38/43) and coronally distributed multifragmentary fragments (62%; n = 18/29). CONCLUSIONS: We showed that typical diaphyseal clavicular fractures have coronal fracture edges and are located within the distal half of the diaphyseal segment. The fractured fragments were initiated anteriorly in the wedge types and then propagated coronally in the multifragmentary types. The features of these fracture edges could be useful in designing osteotomy models and provide different perspectives of anterior and superior plating techniques.

Periosteal reaction-like lesions at the cranial aspect of the humeral diaphysis have a high prevalence in older, large breed dogs and may represent entheses of the superficial pectoral muscles.

Authors have commonly observed lamellar periosteal new bone formation at the cranial aspect of the humeral diaphysis in mediolateral radiographs of the humerus for large breed dogs with no evidence of pain or lameness. The aim of this retrospective, analytical study was to investigate the appearance and prevalence of "humeral periosteal reaction-like lesions" (HPRLL) in dogs and identify any predispositions. Mediolateral radiographs of humeri were evaluated and the presence and extent of "humeral periosteal reaction-like lesions" at the cranial aspect of the humerus were recorded. Macroscopic and histological examination of the humeri were performed for one dog with HPRLL. A total of 2877 mediolateral radiographs of 1727 dogs were included and focal or extended periosteal reaction-like lesions were found in 643 humeri of 387 dogs. Body weight ≥ 30 kg and age ≥ 7 years had a statistically significant, positive effect (P < 0.001) on the presence of HPRLL. German Shepherd dogs and Rottweilers were overrepresented in the group with HPRLL (P < 0.01). At the level of the HPRLL, the enthesis of the superficial pectoral muscles (M. pectoralis descendens and M. pectoralis transversus) to the Crista tuberculi majoris and Crista humeri were macroscopically and histologically identified. The authors propose that higher mechanical loads to the enthesis in large breed dogs may lead to physiological, age-related remodeling processes of the muscular attachment. The finding should not be confused with a pathological condition such as bone neoplasia.

Functional and radiological outcomes of primary ring fixator versus antibiotic nail in open tibial diaphyseal fractures: A prospective study.

BACKGROUND: Management of open fractures of tibia is still a matter of debate due to high incidence of infections. Traditionally external fixators have been advocated in managing open tibial fractures. Due to limited efficacy of systemic antibiotics, recently antibiotic coated intramedullary interlocking nails have been developed for the management of open tibia fractures. Therefore, we conducted this prospective randomized study to compare the functional and radiological outcomes of primary ring fixator versus antibiotic coated nail in open diaphyseal tibial fractures. METHODS: The study included 32 patients with Gustilo-Anderson type II and type IIIA fractures of tibial diaphysis. Out of them 16 patients were managed with Ring External Fixator (Group I) and 16 were managed with OssiproÒ gentamicin intramedullary interlocking tibial nail (Group II). The radiological and functional outcomes were assessed at final follow-up according to and SMFA criteria. Statistical analysis of the data was performed using IBM SPSS statistics 2.0 software. Chi square test and independent student t-test were used and a P value <0.05 was considered statistically significant RESULTS: Union was achieved in 15 patients (93.8%) in group I and 13 patients (81.2%) in group II. Pin tract infection was seen in 6 patients (37.5%) in group I, whereas infection was present in 2 patients (12.5%) in group II. Bone results were excellent in 13 patients (81.3%), good in 2 patients (12.5%), poor in one patient (6.3%). In group II, bone results were excellent in 12 patients (75%), good in one patient (6.2%), poor in 3 patients (18.8%). At 1 year of final follow up, mean SMFA score was 24.41±5.87 in group I, whereas mean SMFA score was 23.703±8.02 in group II. CONCLUSION: Ring fixator as well as antibiotic coated tibial interlocking nail achieved comparable rates of union in the present study. Complication rates were similar in both the groups and the functional and radiological outcomes were comparable in both groups. Results of this study indicate that although ring fixation is an established option for management of open tibial fractures, antibiotic-coated intramedullary nail is also a reliable option in open Grade II and grade IIIA injuries. LEVEL OF EVIDENCE: Level II.

The management of segmental femur fractures: the radiographic 'cover-up' test to guide decision making.

BACKGROUND: Segmental femur fractures often pose management challenges regarding the optimal fixation choice and sequence of surgical events. METHODS: Retrospective review of clinical records and radiographic data of adult patients with segmental femur fractures treated by a conceptual radiographic cover-up test to determine the ideal fixation method between January 2019 and December 2020. RESULTS: Forty patients with 84 individual fractures underwent fracture fixation. The most consistent fracture combinations were intertrochanter-diaphysis (AO31A-AO32) fractures (25%, n = 10) and femur neck-diaphysis (AO31B-AO32) fractures (20%, n = 8). Compared to evidence-based fracture management, the gold standard treatment was used for the fixation of 78 fractures (93%). One patient required revision for fixation failure of a diaphyseal fracture, and two fractures, both open diaphysis injuries, developed fracture-related infections. CONCLUSION: Anatomical alignment and high union rates are possible for segmental femur fractures treated by evidence-based fracture fixation principles. A conceptual radiographic cover-up test assists in matching the best possible implant for each fracture.

Intra-Observational and Inter-Observer Agreement of The Radiographic Humerus Union Measurement (RHUM) in Patients Treated with Dynamic Compression Plate for Humeral Shaft Nonunion.

BACKGROUND: It is important for orthopedic surgeons to follow the union of the fracture after surgery. This becomes even more important after nonunion surgery. The radiological union scale is popular in the follow-up of unions. However, the intraobserver and interobserver agreement of this scale in humeral nonunion surgery is still not found in the literature. OBJECTIVE: This study aimed to reveal the intra/interobserver agreement of the Radiographic Union scale (RHUM) for the humerus as well as the relationship between this agreement, plate placement characteristics, and the number of plates in cases where plates were used for surgical treatment of humeral diaphysis nonunion. MATERIALS AND METHODS: Twenty patients who received surgical treatment for aseptic humeral nonunion at our hospital between 2010-2019 were studied retrospectively. According to RHUM, two observers scored the patients' anteroposterior and lateral radiographs in the postoperative 12th week. The data obtained were statistically analyzed. RESULTS: The mean age was 52.05±15.88 years. While a single plate was used in 14 cases, a double plate was used in 6 cases. Interobserver agreement was fair-moderate. The interobserver agreement values of the single plate group were significantly higher than those of the double plate group (p<0.05). Interobserver agreement in cases with a lateral plate was significantly higher than in the group where the lateral + posterior plate was applied (p:0.01). CONCLUSION: In humeral diaphyseal fracture nonunion cases, the number and location of the plate following surgery negatively impact the evaluation of RHUM scores. Given the importance of the union's follow-up and the decision to proceed with additional treatment in these cases, it may be necessary to develop a new method for determining and monitoring the union if a plate was used in the surgical treatment of humeral nonunion.

Plate Fixation for Atypical Fractures of the Femoral Diaphysis.

Background: Plate fixation for atypical femoral fractures has shown high failure rates compared to intramedullary nail fixation. The aim of this study was to evaluate the radiological results of patients treated with a plate and screws for atypical fractures of the femoral diaphysis. Methods: This study was conducted retrospectively on 16 patients who had undergone internal fixation using plates for treatment of atypical femoral complete fractures from 2007 to 2015. Nine patients were treated with lag screws and short plates while 7 patients were treated with position screws and long plates, which covered the whole femur. Radiologic evaluation was performed on all patients. Complications were also evaluated. Results: Bone union was achieved in all patients and the average bone union time was 17.7 weeks (range, 14-28 weeks). There was no correlation between the preoperative use of a bisphosphonate, plate length, postoperative teriparatide use, and the time to bone union. Regarding complications, 2 cases of complete fractures and 1 impending fracture occurred at the end of short plates. Conclusions: Satisfactory results were obtained with use of plates for patients with atypical femoral complete diaphyseal fractures, in whom intramedullary nails could not be applied due to severe bowing. In particular, it seemed advantageous compared with intramedullary nail fixation in that it could maintain the leg length through anatomical reduction and prevent iatrogenic fracture.

Application of Methods for a Morphological Analysis of the Femoral Diaphysis Based on Clinical CT Images to Prehistoric Human Bone: Comparison of Modern Japanese and Jomon Populations from Hegi Cave, Oita, Japan.

A morphological analysis of ancient human bones is essential for understanding life history, medical history, and genetic characteristics. In addition to external measurements, a three-dimensional structural analysis using CT will provide more detailed information. The present study examined adult male human skeletons excavated from Hegi cave, Nakatsu city, Oita Prefecture. CT images were taken from the femurs of adult males (Initial/Early Jomon Period (n = 10) and Late Jomon Period (n = 5)). Cross-sectional images of the diaphysis from below the lesser trochanter to above the adductor tubercle were obtained using the method established by Imamura et al. (2019) and Imamura et al. (2021). Using Excel formulas and macros, the area of cortical bone, thickness, and degree of curvature were quantitatively analyzed. The results were compared with data on modern Japanese. The maximum thickness of cortical bone in the diaphysis and the degree of the anterior curvature were significantly greater in Late Jomon humans than in the other groups. In contrast to modern humans, the majority of Jomon femurs showed the S-shaped curvature with the medial side at the top position and the lateral side at the lower position. The present results demonstrate that Late Jomon humans had a wider range of activity than the other groups and also provide insights into diseases in the hip and knee joints of Jomon humans.

A geometric morphometric approach to investigate primate proximal phalanx diaphysis shape.

Current approaches to quantify phalangeal curvature assume that the long axis of the bone's diaphysis approximates the shape of a portion of a circle (included angle method) or a parabola (second-degree polynomial method). Here we developed, tested, and employed an alternative geometric morphometrics-based approach to quantify diaphysis shape of proximal phalanges in humans, apes and monkeys with diverse locomotor behaviors. 100 landmarks of the central longitudinal axis were extracted from 3D surface models and analyzed using 2DGM methods, including Generalized Procrustes Analyses. Principal components analyses were performed and PC1 scores (>80% of variation) represented the dorsopalmar shape of the bone's central longitudinal axis and separated taxa consistently and in accord with known locomotor behavioral profiles. The most suspensory taxa, including orangutans, hylobatids and spider monkeys, had significantly lower PC1 scores reflecting the greatest amounts of phalangeal curvature. In contrast, bipedal humans and the quadrupedal cercopithecoid monkeys sampled (baboons, proboscis monkeys) exhibited significantly higher PC1 scores reflecting flatter phalanges. African ape (gorillas, chimpanzees and bonobos) phalanges fell between these two extremes and were not significantly different from each other. PC1 scores were significantly correlated with both included angle and the a coefficient of a second-degree polynomial calculated from the same landmark dataset, but had a significantly higher correlation with included angles. Our alternative approach for quantifying diaphysis shape of proximal phalanges to investigate dorsopalmar curvature is replicable and does not assume a priori either a circle or parabola model of shape, making it an attractive alternative compared with existing methodologies.

HR-pQCT parameters of the distal radius correlate with the bending strength of the radial diaphysis.

High resolution, peripheral quantitative computed tomography (HR-pQCT) scanners can now characterize an individual's trabecular architecture, cortical structure, and volumetric bone mineral density at a nominal resolution of 61 µm. While predictions of failure load of the distal radius and tibial diaphysis in compression by finite element analysis (FEA) of HR-pQCT scans have been validated against mechanical tests of cadaveric bones in compression, namely for images with nominal resolutions of 82 µm and 165 µm, the HR-pQCT parameters that best predict bending strength of cortical bone remain unknown. Therefore, we scanned cadaveric forearms from 31 elderly donors (Female: 72.8 ± 8.8 years and Male: 72.1 ± 6.3 years), and then loaded the radial diaphysis to failure in three-point bending after denuding each bone (38 in total). The cortical parameters had stronger correlations with ultimate moment than the trabecular parameters such that cortical area and estimated failure load of the distal radius had the highest Spearman correlation coefficients (r = 0.89 and r = 0.81, respectively, p < 0.0001). Despite being a known determinant of bone strength, cortical porosity of the distal radius did not correlate with ultimate moment (p = 0.8537). In multivariate linear regressions with section modulus (SM) of the radial diaphysis as one of two predictors of bending strength, cortical area and cortical thickness were each significant contributors to the prediction of ultimate moment. Their contribution was one-half and one-third, respectively, of the contribution from SM. None of the HR-pQCT parameters were strongly correlated with post-yield displacement, an indicator of bone brittleness. In support of HR-pQCT imaging of the distal radius to identify individuals with osteoporosis, the present study found that parameters of the cortex and failure load predictions by linear FEA are strongly related to the bending strength of cortical bone.

Retrospective clinical outcomes in the definitive treatment of high-energy tibial diaphyseal fractures using hexapod external fixator versus monolateral external fixator.

BACKGROUND: External fixation, which can preserve the biomechanical microenvironment of fracture healing, plays an important role in managing the high-energy fractures with poor surrounding soft tissues. The purpose of this study was to determine the differences of clinical outcomes, if any, between hexapod external fixator and monolateral external fixator in the definitive treatment of high-energy tibial diaphyseal fractures. METHODS: A total of 53 patients with high-energy tibial diaphyseal fractures and definitively treated by the hexapod external fixator (HEF) or monolateral external fixator (MEF) were retrospectively collected and analyzed, from March 2015 to June 2019. There were 31 patients in the HEF treatment, and the other 22 patients were managed by the MEF. The demographic data, surgical duration, external fixation time, final radiological results, complications, and clinical outcomes were documented and analyzed. Difficulties that occurred during the treatment were classified according to Paley. The clinical outcomes were evaluated by the Association for the Study and Application of the Method of Ilizarov criteria (ASAMI) at the last clinical visit. RESULTS: The mean surgical duration in the HEF group (62.4 ± 8.3 min) was shorter than that in the MEF group (91.4 ± 6.9 min) (P < 0.05). All patients acquired complete bone union finally. Patients in the HEF group (24.2 ± 3.1 weeks) underwent a shorter average external fixation time than that in the MEF group (26.3 ± 3.8 weeks) (P < 0.05). Satisfactory alignment was achieved in all patients without the need for remanipulation. The residual sagittal plane deformities in the HEF group were all less than that in the MEF group (P < 0.05). The complication rate was 35.5% in the HEF group, while 45.5% in the MEF group. There was no statistically significant difference between the two groups in ASAMI scores (P > 0.05). CONCLUSION: There is no statistically significant difference in finally clinical outcomes between hexapod external fixator and monolateral external fixator in the definitive treatment of high-energy tibial diaphyseal fractures. The hexapod external fixation treatment is a superior effective method, including advantages of stable fixation, less surgical duration, postoperatively satisfactory fracture reduction, and fewer complications.

Fractures of the proximal segments of the pediatric distal radial metaphysis exhibit less angular stability than fractures of the distal segments.

The distal part of the forearm is divided into the physis, metaphysis, diaphyseal metaphyseal junction (DMJ) and diaphysis. The treatment of radial DMJ fractures is challenging because this region has diaphyseal characteristics. We speculated that the stability of metaphyseal fractures could vary depending on their proximity to the DMJ or physis. Our study aimed to investigate the stability of pediatric distal radius fractures in the physis, metaphysis and DMJ. Ninety-five patients were classified into three groups: group D, fracture line located within 1/2 of the width of the radius (WOR) from the physis; group M, fracture line located between 1/2 and 1 WOR from the physis; and group P, fracture line located between 1 and 2 WOR from the physis. We measured sagittal angulation and coronal angulation. A correction loss of less than 9° was defined as a 'stable reduction' outcome and one greater than 10° as a 'loss of reduction' outcome. The correction losses for sagittal angulation were significantly greater in groups M and P than in group D. The correction losses for coronal angulation were significantly greater in group P than in groups D and M. The incidence of 'loss of reduction' outcomes was significantly higher in groups M and P than in group D. The proximal segments of distal radial metaphyseal and DMJ fractures showed less angular stability than distal segments.

Ulnar diaphyseal stress injuries: a case series.

AIM: To describe the demographics, clinical context, imaging findings, and management of a case series of ulnar diaphyseal stress injuries (UDSIs) and propose a unifying mechanism for these injuries based on the imaging findings. MATERIALS AND METHODS: Seven patients from University of Florida College of Medicine (seven total injuries; mean age: 19 ± 4.4 years; three females, four males) with available clinic and imaging data and without predisposing comorbidities were included in this retrospective study. The age, gender, laterality of injury with respect to the dominant hand, attributed inciting activity, imaging method, presence and location of stress injury findings, as well as the subsequent management were analysed. RESULTS: All patients were in the second or third decade of life and there was a slight male predominance to the case series (57%). All UDSIs in this series were unilateral. Fifty-seven percent of injuries involved the dominant ulna and all involved the ulnar diaphysis along the proximal-mid junction, mid diaphysis or mid-distal junction. All injuries involved portion of the ulnar origin of the flexor digitorum profundus (FDP). All patients were managed conservatively. CONCLUSION: UDSIs are uncommon and associated with a broad range of occupational or sports-related activities. All cases in this series involved the ulnar origin of the FDP suggesting an important role for the forces exerted by this muscular attachment on the underlying bone with regard to the development of UDSIs.

Biomechanical analysis of the correlation between mid-shaft atypical femoral fracture (AFF) and axial varus deformation.

BACKGROUND: Atypical femoral fractures (AFF) are diaphyseal fractures of the elderly that occur at the end of a minor trauma. The objective of this biomechanical study, using finite element modelling, was to evaluate the variations of the femoral diaphysis fracture indicator according to the variations of the mechanical axis of the lower limb, which can explain all the different atypical fracture types identified in the literature. METHODS: In order to measure variations in stress and risk factors for fracture of the femoral diaphysis, the distal end of the femur was constrained in all degrees of freedom. An axial compression load was applied to the femoral head to digitally simulate the bipodal support configuration in neutral position as well as in different axial positions in varus/valgus (- 10°/10°). RESULTS: The maximum stress value of Von Mises was twice as high (17.96 ± 4.87 MPa) at a varus angle of - 10° as in the neutral position. The fracture risk indicator of the femoral diaphysis varies proportionally with the absolute value of the steering angle. However, the largest simulated varus deformation (- 10°) found a higher risk of diaphysis fracture indicator than in valgus (10°). CONCLUSIONS: Variations in the mechanical axis of the lower limb influence the stress distribution at the femur diaphysis and consequently increase the risk of AFF. The axial deformation in varus is particularly at risk of AFF. The combination of axial deformation stresses and bone fragility consequently contribute to the creation of an environment favorable to the development of AFF. TRIAL REGISTRATION: 'retrospectively registered'.